EIGRP stand for (in CCNA)

EIGRP stand for in CCNA

EIGRP stand for _______

  1. Enhanced  Interior Gateway Routing Protocol
  2. Enhanced  Interior Gateway Route Protocol
  3. Enhancement  Interior Gateway Routing Protocol
  4. None of the above

In which layer of the OSI model does EIGRP operate?
A) Data Link Layer                                                                                                                            B) Network Layer
C) Transport Layer
D) Application Layer
Answer: B) Network Layer

What type of routing protocol is EIGRP?
A) Distance-vector routing protocol
B) Link-state routing protocol
C) Path-vector routing protocol
D) Hybrid routing protocol
Answer: D) Hybrid routing protocol

Which algorithm does EIGRP use to calculate the best path to a destination network?
A) Bellman-Ford algorithm
B) Dijkstra’s algorithm
C) Floyd-Warshall algorithm
D) SPF algorithm
Answer: A) Bellman-Ford algorithm

What is the administrative distance of EIGRP?
A) 90 eigrp stand for in ccna
B) 100 eigrp stand for in ccna
C) 110 eigrp stand for in ccna
D) 120 eigrp stand for in ccna
Answer: B) 100

Which factor is NOT considered by EIGRP when calculating the metric for a route?
A) Bandwidth eigrp stand for in ccna
B) Delay eigrp stand for in ccna
C) Load eigrp stand for in ccna
D) Hop count v
Answer: D) Hop count

What type of updates does EIGRP send when there is a change in the network topology?
A) Periodic updates
B) Triggered updates
C) Incremental updates
D) Broadcast updates
Answer: B) Triggered updates

Which of the following is a feature of EIGRP that reduces the amount of routing information exchanged between routers?
A) Hold-down timers
B) Split horizon
C) Poison reverse
D) Route summarization
Answer: D) Route summarization

In EIGRP, what is the purpose of the “feasible successor” concept?
A) To determine the primary router for a route
B) To identify routers that are unreachable
C) To provide redundancy in routing paths
D) To minimize the convergence time
Answer: C) To provide redundancy in routing paths

Which port does EIGRP use for communication between routers?
A) 80
B) 179
C) 443
D) 8080
Answer: B) 179

eigrp stand for in ccna

In a network topology with three routers connected in a triangle, Router A advertises a route to network 192.168.1.0/24 with a metric of 1560. Router B receives this update with a metric of 2130. What action will Router B take regarding this route?
A) Router B will consider Router A as a feasible successor for network 192.168.1.0/24.
B) Router B will ignore the route advertised by Router A.
C) Router B will recalculate the metric and advertise the route to Router C.
D) Router B will send a triggered update to Router A requesting more information.
Answer: A) Router B will consider Router A as a feasible successor for network 192.168.1.0/24.

In a network topology consisting of four routers, Router A is directly connected to networks 10.0.0.0/24 and 20.0.0.0/24. Router B is connected to networks 20.0.0.0/24 and 30.0.0.0/24. Router C receives updates from both Router A and Router B about the network 20.0.0.0/24. Which update will Router C prefer?
A) Router A’s update for network 20.0.0.0/24 with a metric of 4500
B) Router B’s update for network 20.0.0.0/24 with a metric of 3000
C) Router A’s update for network 20.0.0.0/24 with a metric of 2500
D) Router B’s update for network 20.0.0.0/24 with a metric of 5000
Answer: C) Router A’s update for network 20.0.0.0/24 with a metric of 2500

Consider a network topology where Router A is connected to networks 192.168.1.0/24 and 10.0.0.0/24. Router B is connected to networks 10.0.0.0/24 and 172.16.1.0/24. If Router A fails, which router(s) will Router B consider as feasible successors for the network 192.168.1.0/24?
A) Router B
B) None, as there are no feasible successors
C) Both Router B and the successor to Router A
D) Router A
Answer: B) None, as there are no feasible successors

In a network topology where Router A is connected to networks 10.0.0.0/24 and 20.0.0.0/24, and Router B is connected to networks 20.0.0.0/24 and 30.0.0.0/24, if the link between Router A and Router B fails, what will Router B do?
A) Router B will send a triggered update to Router A.
B) Router B will declare itself as the successor for all networks.
C) Router B will recalculate routes and update its routing table accordingly.
D) Router B will wait for Router A to send updates.
Answer: C) Router B will recalculate routes and update its routing table accordingly.

In a network topology with three routers, Router A is connected to networks 10.0.0.0/24 and 20.0.0.0/24, Router B is connected to networks 20.0.0.0/24 and 30.0.0.0/24, and Router C is connected to networks 30.0.0.0/24 and 40.0.0.0/24. If Router A advertises a route to network 40.0.0.0/24 with a metric of 3500, what will Router C do upon receiving this update?
A) Router C will ignore the update.
B) Router C will consider Router A as a feasible successor for network 40.0.0.0/24.
C) Router C will forward the update to Router B.
D) Router C will recalculate the metric and advertise the route to Router B.
Answer: A) Router C will ignore the update.

eigrp stand for in ccna eigrp stand for in ccna eigrp stand for in ccna

2 thoughts on “EIGRP stand for (in CCNA)”

Leave a Comment